In view of the poor anti-corrosion performance of carbon steel pipes, the use of epoxy resin coated steel pipes is an effective solution. The following are specific solutions and implementation plans, covering technical principles, process optimization, and supporting measures to help comprehensively improve the anti-corrosion performance of carbon steel pipes:
First, the anti-corrosion advantages of epoxy resin coated steel pipes
1. Chemical inert protection: After curing, the epoxy resin coating forms a dense inert film, which blocks the penetration of corrosive media such as water, oxygen, and Cl⁻, and is resistant to acid, alkali, and salt (pH 3~11).
Data support: Laboratory salt spray tests show that the corrosion resistance of epoxy coated steel pipes can reach more than 30 years (ISO 12944 standard).
2. Electrochemical isolation: The coating resistivity is as high as 10¹² Ω·cm, which cuts off the electrochemical reaction path between the carbon steel pipe and the environment to avoid galvanic corrosion.
3. Mechanical performance enhancement: adhesion ≥ 10MPa (cross-cut test), wear resistance (500g/1000 revolutions weight loss <50mg), resistance to 3° bending without cracking, and adaptability to complex working conditions such as buried and overhead.
Second, key process optimization measures for carbon steel pipes
1. Substrate pretreatment
- Sandblasting and rust removal: Sa2.5 level (GB/T 8923), roughness 40-80μm, enhance coating anchoring force.
- Phosphating treatment: generates phosphate conversion film to improve interface bonding strength (adhesion increased by 20%-30%).
2. Coating process upgrade
- Electrostatic spraying: corona discharge is used to make epoxy powder evenly adsorbed, and the thickness is controlled at 200-400μm (too thin is prone to pinholes, too thick is prone to sagging).
- High temperature curing: cross-linking reaction at 180-200℃ for 20-30 minutes to ensure complete curing (DSC detection curing degree > 95%).
3. Defect prevention and control technology
- Online spark leak detection: 3.0-5.0kV voltage detection to ensure no leaks (JIS G3447 standard).
- End surface treatment: Apply epoxy resin + polyethylene heat shrink sleeve at the groove to avoid corrosion of the cut surface.
Third, carbon steel pipe supporting an anti-corrosion enhancement plan.
1. Cathodic protection synergistic anti-corrosion: Sacrificial anode: with magnesium alloy anode (-1.5V vs CSE), protection current density 0.1mA/m², covering the coating defect area.
2. Composite structure design: 3PE anti-corrosion layer: bottom epoxy powder (200μm) + middle adhesive (250μm) + outer polyethylene (3mm), suitable for highly corrosive soil (such as chloride content > 5% area).
3. Environmental adaptability design
- Heat-resistant epoxy: modified amine curing agent system, so that the coating temperature resistance is up to 120℃ (such as oil pipeline).
- UV-cured coating: UV-cured epoxy resin with nano-TiO₂ added is used for anti-aging of open-air pipelines.
Fourth, key points of the construction and maintenance of carbon steel pipes
1. Transportation and installation protection: Use nylon slings for hoisting to avoid mechanical damage. When storing, place wooden blocks at the bottom to prevent water accumulation.
2. Anti-corrosion repair of welding area: After on-site welding, use epoxy zinc-rich primer (80μm) + polyurethane topcoat (120μm) for repair, with adhesion ≥5MPa.
3. Intelligent monitoring system: ER corrosion probes are installed on buried pipelines to monitor the impedance changes of coatings in real time, and the warning value is set to less than 10⁶ Ω·cm².
Summary
More than 90% of conventional corrosion problems can be solved through epoxy resin coating + process optimization (such as electrostatic spraying/high temperature curing). For extreme environments, 3PE composite anti-corrosion or cathodic protection combined solutions can be used. At the same time, it is necessary to pay attention to construction quality control (such as sandblasting level, coating detection) and full life monitoring to maximize anti-corrosion performance.
Post time: Jul-10-2025